He joined company in 1958 and the first one joined this department with rich working experiences and qualification likely a company CIS
The challenge things are the most attractive ones for him; each thing is easy to be done under his professional skills.
The item with more difficulties for repair is”Tuba ”.
You don’t have to worry about how to fix the French Horn because of its curve shape because it can be separated to be several connectors for metal treatment.
Everything can be done by master Li; so musicians or the musical instrument owners don’t worry about any discrepancies from maintenance.
That learning how to produce the musical instruments is the necessary first step to go next step of fix action.
Master Li is right the instructors for all the new-coming staffs.
Clarinet
Double check to see if there any parts or keys are in damage
Double check to see if the connector is well fixed
Go ahead to repair for the necessary parts and connectors.
Fix the seals under the keys
Assembling and test the tones
Demonstrator: Master He, Yu Xia
She joined company in 1970 with total thirty-five year working experience and is the top 1 specialized for reed instruments maintenance in company.
She is the most qualified among the co-workers from production line to be selected to repair the musical instruments because of her higher sensitivities for tones.
Without the tone tester in the earlier age, they can use a set of organ and reeds to fix the tone.
She is able to take care all the Reed Instruments repair service in the Zuchou office.
Accordion
Take off the parts from accordion
Use the Tone Tester to go ahead repair action.
Fix the out of standard reeds.
Use the welding torch to re-load the reeds
Install and test again
Demonstrator: Mr. Yu, Han Zhang
He joined company in 2000 and transferred to maintenance department during year 2003 total with 5-year working experience.
With talent and working hard, he spent only short time to start the outdoor maintenance service for publics.
Flute
Flute is right the metal tube with several holes on it.
Have the holes outside and make these concrete .
weld with small metal balls on them .
To have the metal tube electroplated with silver color to turn into more smoothly.
Other tubes with different sizes will be treated in the same ways as the main metal tube.
You have to produce and electroplate the press keys separately and go ahead to assemble these as a semi final product.
To have the semi final key modules welded onto the independent metal tubes.
